Skip to content

Cross-connects and site access

This page covers cross-connects and site access at TheHUB's current site, Equinix TY15: connecting your equipment, connectivity from another site, and visiting and working in TheHUB's cage. It is for your infrastructure or network engineer. The requests on this page, including asking TheHUB to order a cross-connect, must come from, or be confirmed by, one of your Authorizing Officers.

Cross-connects

A cross-connect is a fiber link ordered from the data-center operator, Equinix.

From your own space

This applies to equipment in your own space in the same building. Your onboarding guide says how many cross-connects you need.

  1. Agree the number of ports and their speed with your TheHUB contact before any cross-connect is ordered. A computing provider, which hosts other firms' servers, also agrees the attachment for each firm it hosts, a dedicated port or a sub-interface on a trunk. TheHUB tells you the optic type then.
  2. Order each cross-connect one of two ways:

    • TheHUB orders it, by default, through the Equinix customer portal under a Letter of Authorization (LOA) from you, authorizing TheHUB to order into your space on your behalf. The LOA names your company, cabinet, patch panel, and port. Send or forward it by email from an Authorizing Officer's address on file to TheHUB's operations mailbox. Or issue it through the Equinix customer portal from your own Equinix account. TheHUB checks the LOA before it orders.
    • You order it from your own Equinix account, into TheHUB's patch panel, under TheHUB's LOA. Request TheHUB's LOA by email to its operations mailbox. TheHUB does not give customers access to its own Equinix customer portal.

    Either way, you do not specify a fiber length: TheHUB measures the cross-connect run and fits a compensating spool, fiber cut to bring your path to the common fiber length, at your demarcation, where your network hands off to TheHUB's cabling (see Equal path lengths).

Equinix lead time

Equinix's published provisioning service-level agreement (SLA) for standard cross-connects is 24 hours for an order of up to three cross-connects, longer for larger orders (Equinix Cross Connects, retrieved 2026-10-26). That is Equinix's figure, not TheHUB's.

Verify

Ask your TheHUB contact which leaf port each connection lands on (a leaf is a switch where customers plug in), and check the link light and the interface state on both sides.

How TheHUB checks your LOA

Before TheHUB orders under your LOA, it checks two things:

Check Passes when
The sender The LOA comes from an Authorizing Officer (sent or forwarded from the email address TheHUB has on file), or is issued through the Equinix customer portal from your own Equinix account
The details The company name, cabinet, patch panel, and port match TheHUB's records and your Order Form, the contract you signed with TheHUB

If either check fails, TheHUB confirms the order with one of your Authorizing Officers before it orders.

In TheHUB's cage: a patch, not a cross-connect

TheHUB patches your cabinet from its patch panel, with no LOA.

  1. Agree with your TheHUB contact how many ports of each speed you want.
  2. TheHUB pre-patches them as agreed above and tells you the patch-panel position and the leaf port of each.

Verify

Check the link light and the interface state on both sides of each pre-patched port.

From another site

Connectivity from another site into your cabinet in TheHUB's cage, including an Equinix Metro Connect (Equinix's fiber connection between two of its data centers in the same metro area), needs an LOA from TheHUB, not from you. TheHUB holds the Equinix account for its cage, and Equinix requires the account holder's LOA before it quotes or orders the connection. Request TheHUB's LOA by email to its operations mailbox before you order the connection.

Site visits and work in the cage

This section applies to a cabinet in TheHUB's cage. For its ports, see In TheHUB's cage: a patch, not a cross-connect.

  • Keep the top two rack units of your cabinet free. TheHUB fits its patch panels there.
  • Email your shipping details to TheHUB's operations mailbox before equipment ships: the carrier, the tracking number, and the expected delivery date. TheHUB files the facility's inbound shipment ticket using those details. A delivery with no ticket is not expected by the site, which has no basis to accept it.
  • Your engineers enter the site as visitors. For each visit, TheHUB books an Equinix work visit, and Equinix issues each visitor a quick response (QR) code, the entry credential for that visit. Give TheHUB the email address and mobile number of each engineer who attends. The request must come from, or be confirmed by, one of your Authorizing Officers. Visitors show photo identification on arrival. Your engineers get no badge and no standing access to the site.
  • A computing provider's downstream customer, a firm whose servers the provider hosts, gets no cage access. TheHUB refers its site-access requests to the provider.
  • Request smart hands by email. Smart hands are Equinix's on-site technicians, who do patching, installs, and checks on request. Email your statement of work (SOW) for the task to TheHUB's operations mailbox. TheHUB opens the Equinix ticket and adds you as its technical contact, so the technicians work with your engineers directly.

See also

Last reviewed 2026-11-18.