Skip to content

Onboarding

Not ordered yet? Book a call through jointhehub.com. Already connected? Rerun the checks in Verify and go live.

Choose your guide

Your setup Follow
You connect your own equipment Onboarding a venue or trading firm
You host other firms' servers Onboarding a computing provider
Your servers are hosted by a computing provider If a computing provider hosts your servers

The three-step sequence

After the order is signed, TheHUB holds a kickoff, the technical meeting where target dates are agreed and your TheHUB contact is named. Each guide then walks the same three steps, in order, for each tenant:

  1. Physical connection and equalization: a cross-connect from your own space, or a patch inside TheHUB's cage.
  2. Interface: dedicated ports, or a sub-interface on a computing provider's trunk (one port carrying several tenants).
  3. Network architecture and addressing: addresses, the routes you advertise, and the Border Gateway Protocol (BGP) session.

Then you and TheHUB run the checks, and the tenant becomes service live (see Verify and go live).

Order signed

Kickoff
Target dates agreed, TheHUB contact named

Step 1: Physical connection and equalization
Placement, cross-connect or in-cage patch, path cut to length

Step 2: Interface
Dedicated ports or a trunk sub-interface for each tenant

Step 3: Network architecture and addressing
Addressing, advertised block, session

Verify
Checks for each tenant

Service live

Requests to TheHUB

Requests to TheHUB, such as orders, site visits, and changes, must come from, or be confirmed by, one of your company's Authorizing Officers, the people it names during commercial onboarding. TheHUB gives you its operations mailbox address at the kickoff.

If a computing provider hosts your servers

Your computing provider connects you to TheHUB as one of its downstream customers, and TheHUB provisions you as one of the provider's tenants.

  • Your provider declares your role, exchange or trader, and receives your addressing from TheHUB in its allocation table.
  • You have no cross-connect or router work of your own. Your external BGP (eBGP) session with TheHUB runs from your provider's router, not from your host.
  • Your provider's handoff to TheHUB is where TheHUB's equalized path ends. Your provider's network, up to your server, is outside it.
  • Using DoubleZero, a private fiber network, is optional. If you use it, your provider requests your access pass (DoubleZero's entitlement record, bound to one address) and your engineer follows Set up the DoubleZero client.
  • Ask your provider for your DoubleZero client address, the address from your block that your host sends DoubleZero traffic from, listed in its allocation table.
  • You get no access to TheHUB's cage. TheHUB refers a site-access request from a computing provider's downstream customer to the provider.
  • In-hub market data reaches you only through a provider in TheHUB's cage whose switch runs the multicast control plane. Ask your provider (see Receive in-hub market data).

Last reviewed 2026-11-19.